Publicidad
Idiomas disponibles
Idiomas disponibles
Step 7
Align the mechanism with the gas lift and insert it.
Step 8
U
Insert the headrest (U) into the backrest (P), and then use 2 M6x16 screws (V) to secure
the headrest (U).
Step 9
W
Install the backrest
decorative cover (W).
Install the backrest decorative cover (W) to finish the assembly.
05
V
Use 2 M6x16 screws (V) to
secure the headrest (U).
Operation Instructions
(Please refer to the actual size.)
The backrest can be adjusted up
and down in 4 levels.
Rotate the handle backward
activate the recline function,
return the handle to lock the
recline angle.
Rotate the handle forward to
adjust the seat depth, and lock
the seat depth by returning the
handle.
Safety Installation
1. Each chair is designed to support the weight of one person only.
2. Please use the chair on a flat, even surface.
3. Do not allow children under the age of 5 to sit on the chair without supervision.
4. Avoid sitting on the armrest to prevent potential accidents.
5. Do not stand on the chair, use it as a ladder, or step on it.
6. Please refrain from placing excessive weight on the chair or using it as a makeshift trolley.
7. Avoid using sharp or pointed objects that could damage the chair, and keep it away from
open flames or sources of heat.
8. For your safety, do not attempt to disassemble the gas lift mechanism.
The headrest can be adjusted
up and down and rotated.
The armrest can be adjusted
up and down, forward or
backward, and rotated upward
by 35 degrees, inward and
outward.
Rotate the handle upward to
adjust the seat height, and
release the handle to lock the
seat height.
06
Publicidad
