Publicidad
Idiomas disponibles
Idiomas disponibles
First use
First use
Checking the product and scope of delivery
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged or missing.
If this is the case, do not use the product. Contact the manufacturer via the
service address indicated on the warranty card.
Basic cleaning
1. Remove the packaging material and all plastic wrappings.
2. Clean all parts of the product before first use as described in the chapter
"Cleaning".
Product assembly
1. Attach the top frames
Use the hex key
frames (see step 2 in Fig. B).
2. Assemble the two cross bars
run one short bolt through the middle screw holes on the cross bars and
secure them with the nut
3. Place the shelves
the four shelf holders with four short bolts underneath the shelves
(see Fig. D).
4. Further secure each shelf to the frames with four long bolts
of the shelves (see step 1 in Fig. E).
5. Screw the feet
You can adjust the feet for your desired height.
The product is now assembled.
10
1
to the bottom frames
12
to secure them with two short bolts
4
7
using the wrench
3
on the shelf holders on each tier. Secure each shelf to
8
into the bottom of the bottom frames (see step 2 in Fig. E).
to the frames with four short bolts. Further
11
2
(see step 1 in Fig. B).
6
for each pair of
(see Fig. C).
5
to the sides
Publicidad
