Nexigo N60 Manual Del Usuario página 22

Q7: Why is there flickering or banding on the video
feed when I use the webcam?
A: This might be due to lighting inconsistencies in your
room. To resolve this, download the NexiGo Webcam
Settings Software from nexigo.com/software. In the
software, select your NexiGo webcam in the device
selection bar, then change the powerline frequency to
either 50Hz or 60Hz depending on your needs. For
example, if your screen flicks at 50Hz, you can switch
to 60Hz to solve it.
Note: The camera defaults to indoor mode. Please do
not aim the camera directly at the light source.
EN 19