monolith UAVS 450 A1 Guía Breve página 10

First use
Note
► The waste collector
you hear it click into place. Otherwise, the appliance will not start!
► The appliance cannot be used until the waste collector
in all the way (this deactivates the automatic safety cut-off).
► Every shredder is tested for functionality after manufacture. It is possible that
you may find paper residue in the cutting blades.
♦ Insert the plug
Operation
Switching the appliance on
♦ Move the On/Off switch
Press the AUTO button
♦
blue.
Note
► Make sure the waste collector
7
base
and the LED
blue if the waste collector
Inserting paper
CAUTION!
Never feed paper into the cutter opening
staples attached! These could damage the cutting blades.
Note
You can shred up to 10 sheets (80 g/m
max.
10
x 80g/m2
UAVS 450 A1
0
must be pushed fully into the appliance base
5
into a mains power socket.
3
on the rear of the appliance into position
t
to turn the appliance on. The LED
0
and has clicked into place! Otherwise, the appliance will not start
t
flashes blue. The LED
0
is pushed fully into the appliance base
0
is inserted correctly into the appliance
t
will only light up continuously
4
if it still has paper clips or
paper) at the same time.
2
7
until
has been pushed
I
.
t
lights up
7
.
GB │ IE 7
│
■