Publicidad
Idiomas disponibles
Idiomas disponibles
Film speed
The camera is designed to use DX-coded films with ISO 100 and 400. With ISO
100 or 400 film, the exact film speed is automatically set in the camera. If non
DX-coded film is loaded, film speed is automatically set to ISO 100.
3. Taking pictures (Fig. E)
1. To turn the camera ON, lightly press the shutter release button.
2. Hold the camera firmly, look in the viewfinder and adjust the zoom setting to
the desired image size.
3. Keep the subject at least 1.90m (6.2 ft.) away from the camera at the wide-
angle setting and 2.3m (7.5 ft.) at the telephoto setting for sharp pictures.
4. Fully press the shutter release button to take pictures.
Note: As no power switch is provided with this camera, the camera is
activated everytime you press the shutter release button halfway,
move the zoom lever or slide the Flash/Macro switch down.
— 3 —
Publicidad
