Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Cover lock
3.
Control panel
5.
Stand
7.
Corpus
9.
Water hole
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
Disassemble the device and all its components and clean them before the first use.
3.3.
Device use
Functional testing before hatching:
Assemble the unit and check that the internal structure is complete.
Connect the unit and the incubator will start to operate.
A low temperature/humidity alarm will appear, press any button to cancel it.
Pour water into the water hole (up to 1400 ml).
Press and hold the humidity setting button to check that the unit can turn the eggs normally.
EN
2.
Dust cover
4.
Egg tray frame
6.
Cover
8.
Lock
10.
Base
Publicidad
