Publicidad
TROUBLESHOOTING
SYMPTOM
The adapter is not connected
No power
The unit is in power off mode
Volume level in minimum position
No sound or
sound weak
The paired/connected device is not in
playback mode
Sound distortion/rattle
Volume level too high
Remote Control
not functioning
Bluetooth
reception failure
POSSIBLE CAUSE
Input source incorrect
Out of working range
The battery in the remote control is
drained
The external device is too far from the
unit
Have not paired
POSSIBLE SOLUTION
Connect the adapter to the unit and wall
outlet
Press the Standby/Source button
unit or press the
control to power on the unit
Raise the volume level by pressing the
Vol+ button on the unit or the + button
on remote control
Play music/movie in the paired/connected
device as usual and make sure the volume
level of it is in high level
Press the Standby/Source on the unit to
switch to desired mode
Reduce the volume level by pressing
the Vol- Button on the unit or press the -
button on remote control
Reduce the volume level of the
paired/connected device.
Point the remote control to the
remote sensor on the unit within
16 feet, +/-30 degress
Replace with new battery
Put the external BT device close to the unit
Pair the unit with the BT device as the
procedures stated in this manual.
15
on the
button on remote
Publicidad
