Publicidad
Installation complete/
Congratulations!
You have successfully set up your device. If you have any problems, see the LED display section below to help identify the problem.
¡Felicitaciones!
Ha configurado correctamente su dispositivo. Si tiene algún problema, consulte la sección siguiente para obtener ayuda para identificar
la causa.
LED display/
Visualización de las luces LED
The device is power-on.
Green-Steady
El dispositivo está alimentado de corriente eléctrica.
Verde Constante
Abnormal
Red-Steady
Power
Anormal
Rojo Constante
Poder
Software update in progress
Amber-Blinking
Actualización de software en curso.
Ámbar Parpadeante
Green-Steady
Connected to Internet successfully
Verde Constante
Conectado a internet con éxito
Internet
Green-Blinking
Connected to Internet successfully, data transmitting
Internet
Verde Parpadeante
Conectado a Internet con éxito, datos están transmi-
Red-Steady
tiendo
Rojo Constante
Internet connect failure
Fallo de conexión a Internet
Green-Steady
Wi-Fi connected
Verde Constante
Wi-Fi conectada
Green-Blinking
Wi-Fi data transmitting
Verde Parpadeante
Datos Wi-Fi están transmitiendo
Wi-Fi
Blue-Blinking
Wi-Fi disabled
Wi-Fi
Azul Parpadeante
Wi-Fi deshabilitada
Dark
You may turn on/off Wi-Fi via Wi-Fi on/off button in
Oscuro
rear panel
Puede encender/apagar Wi-Fi a través del botón de
encendido/apagado de Wi-Fi en el panel posterior
Tech Support
Soporte Técnico
To access user manuals, Frequently Asked Questions etc, visit our website at: https://www.hitrontech.com/support/faq-wifi-extender-aria2110/
Para acceder a los manuales de usuario, Preguntas frecuentes, etc., visite nuestro sitio web en: https://www.hitrontech.com/support/faq-wifi-extender-aria2110/
Safety warnings/
Advertencias de seguridad
WARNING/
ADVERTENCIA
Risk of electrical shock. Do not expose the device to water or moisture.
The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors.
Keep the device in an environment between 0°C ~ 40°C (32°F ~104°F). To avoid overheating, do NOT place any object on top of the device.
Do not restrict the flow of air around the device. The manufacturer assumes no liabilities for damage caused by any improper use of the device.
Riesgo de descarga eléctrica. No exponga el dispositivo al agua ni a la humedad.
Este es un dispositivo de alto rendimiento diseñado para entornos de hogar y oficina. No utilice el dispositivo en exteriores.
Mantenga el dispositivo en un ambiente de entre 0°C - 40°C (32°F - 104°F). Para evitar el sobrecalentamiento, NO coloque ningún objeto en la parte superior del mismo.
No restrinja el flujo de aire alrededor del cable módem. El fabricante no asume ninguna responsabilidad por el daño causado por el uso inadecuado del dispositivo.
DISCLAIMER/
EXENCIÓN DE RESPONSABILIDAD
The manufacturer assumes no liabilities with respect to the contents of this document.
The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments.
Specifications subject to change without notice.
El fabricante no asume ninguna responsabilidad con respecto al contenido de este documento.
El fabricante también se reserva el derecho de revisar este documento o actualizar este contenido sin ninguna obligación de notificar a alguna persona sobre dichas revisiones o
enmiendas.
Especificaciones sujetas a cambio sin previo aviso.
CAUTION/
PRECAUCIÓN
The fiber distribution system should be grounded (earthed) in accordance with ANS/NFPA 70, the National Electrical Code (NEC).
El sistema de distribución de fibra se debe poner a tierra de acuerdo con ANS/NFPA 70, el National Electrical Code.
Federal Communication Commission Interference Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Instalación completa
Green-Steady
Wireless backhaul signal is great
Verde Constante
La señal de backhaul inalámbrica es excelente
Blue-Steady
Wireless backhaul signal is ok. WPS paired
La señal de backhaul inalámbrica está bien. WPS
Azul Constante
emparejado
Blue-Blinking
WPS is pairing
Azul Parpadeante
WPS está emparejamiento
Amber-Steady
Wireless backhaul signal is weak
La señal de backhaul inalámbrica es
Ámbar Constante
Amber-Blinking
Establishing connection
Ámbar Parpadeante
Conexión está estableciendo
White(Purple)-Steady
Reset to factory default
Blanco(Morado)
Restablecer la configuración a predeterminados de
fábrica
Parpadeante
COPYRIGHT © 2023 HITRON TECHNOLOGIES, INC.
débil
Publicidad
