Publicidad
Idiomas disponibles
Idiomas disponibles
Absentee Recording
Before beginning:
@
Prepare the timer and make all the necessary connections. Connect
the Power Cord.
@
Check that the timer is set to the correct time.
1. Set the timer to EVER-ON or ON.
*
There are differences between the timers on the market so please
refer to the timer's operator's manual
for the correct procedure
for your timer.
2. Turn on the power to the deck and
the other components
connected
to
the timer and prepare for recording.
See page 7.
3. Set the REV SELECTOR.
SELECTOR
4. Press the deck's PAUSE
( § § ) but-
ton.
When
recording in forward direction
press
the
Forward
( » ) and
REC
{ @ ) buttons simultaneously.
*
If recording
is to begin
in the
reverse
direction,
press
the
Re-
verse
( <« ) and REC ( @) but-
tons simultaneously.
RIGHT
LINE
IN
LEFT
LINE
IN
Speaker
@
Check how long the tape can record.
Set the TAPE SELECTOR correctly for the tape being used.
@
Set the TAPE SPEED selector to the desired recording speed.
5. Depress the stop button ( mm ) to re-
lease recording standby.
6. Set the TIMER
START
selector on
this deck to REC.
Een
REC
OFF
PLAY
Shae
(i)
7. Set the timer start time and length of recording time, then set the
timer
to AUTO
or TIMER
the deck and other components
will be
turned off.
*
If this deck is connected to a multi program timer, continuous
recording for a long period is possible.
*
All the components
will be turned on and the deck will go into
recording mode at the designated time.
@
Once
absentee
recording
has finished
the power
supply
will be
automatically cut to the components but please ensure the TIMER
START selector is OFF before switching on the power to this deck
again.
Power cord
86
GCOO0 9000 00 FN00N00dIVE
AC
OUTLET
UNSWITCHED
'*lomd
© |e
le
14
10000
noi
©
Power cord
Pre/Main Amplifier
Power cord
Publicidad
