Publicidad
Idiomas disponibles
Idiomas disponibles
frequently changing habits for whom an exact schedule of weekly operation
would be difficult to establish. You can select Eco Comfort mode of operation –
for higher level of comfort which a
lo
wer extent.
Eco Night (SMART algorithm with night-time heating priority).
If the operation of the appliance in Eco Comfort mode does not satisfy you,
please select the next level of comfort Eco Night
5. 5
Vacation mode
If you plan to be away from home for more than 1 day, you can enable the
Vacation mode so that the electric water heater will "know" when you will be
back to provide you with hot water.
To enable Vacation mode press the
In the screen that is displayed set the date, time and the desired temperature of
the water using the controls on the screen.
To disable Vacation mode, select one of the other modes of operation.
6.
BOOST function.
When the BOOST function is enabled the water heater will heat the water up
to the maximum possible temperature without changing the algorithm of
operation of the respective mode of operation, i.e. Without changing the week
program, the "Eco smart" control logic or the manually set temperature. When
the maximum temperature has been reached the appliance automatically
switches to the previously selected model of operation.
ADDITIONAL SETTINGS
QUICK START ��
Choose "More" ... button to enter additional settings of the chosen appliance.
1.
Rename appliance
Through this menu, you have the option to assign a name to each appliance
that you control through the app. In the "Name" field, enter a recognizable
name and confirm it with the "Confirm" button.
2.
Device Information;
TROUBLESHOOTING
If you have any problems with your water heater, please contact the service which is add in the warranty card or the dealer from which you have bought the device.
Most frequent problems:
Failed connection to or finding of the Wi-Fi network of the appliance
Failed connection to the home Wi-Fi network
(wireless connection)
The water heater cannot be seen in the application.
The water heater is connected correctly, but it does not work
If the inbuilt wireless module does not find the wireless router
(modem)
You have forgotten the password of the wireless Wi-Fi device of the
water heater.
An attempt to restore the factory settings fails.
Upon opening the mobile application, the main menu is visualized in
the water heater's network
English
gain guarantees energy saving, but to a
button.
Vacation
3.
Statistics;
By means of a graph, it displays information about the operation of the device
for the last 24 hours.
4.
Energy calculator - gives information about the consumed power for a
specific period of time.
•
Power consumption from the date of the last reset;
•
The counter value can be cleared using the "Reset" button.
•
Detailed information about the consumed energy for the current day, the
previous day, for the year.
Note:In order for the calculator to function correctly you need to select the
volume of the electric water heater. For some models the volume is
determined automatically by the app, while for others it is selected from the
suggestions in the list on the screen.
Note:The volume of the water heater is marked on the rating plate of the
appliance.
Note: The calculator is not a precise measuring device. It is a function that
gives you information about the consumed energy.
5.
Settings;
World Clock - Select your location, depending on which country you are in.
6.
Delete appliance.
unction, the selected device is removed from your profile.
With this f
For full instructions for use and store, follow thе link below:
TESY's team reserves the possibility to change and add new functions in the
products with inbuilt Wi-Fi module, as well as to change the instructions in
accordance with the new versions of the software.
Solution:
Check whether the wireless connection symbol on the display is active.
Check whether the appliance is connected to the power supply source.
Get close to the appliance.
Check whether the modem is on.
If you use a laptop, make sure that the switch for the wireless connection, located in the
front, the side or the back of the laptop is in ON position
Make sure that you have entered correctly the name of your home network.
Wait for about 1 minute and check again whether the connection is successful.
Check whether your router is connected to the Internet.
The appliance has to be connected to the wireless router (modem) in your house (of-
fice).
Check whether you have entered correctly the email of your account in the main menu
of the appliance's network.
Restart the application.
Use an additional wireless module to enhance the signal of the wireless router
(modem).
If you have forgotten the password for protection of your network, you will need to use
the RESET function of the appliance to restore its factory settings. See Instruction for
use and storage, Restore Factory Settings section.
The appliance has to be switched off from the stand-by button (it has to be illuminated in white).
If upon activation of the mobile application the main menu of the water heater is loaded,
and not the dedicated screen for control via the Internet, you need to stop the direct
Wi-Fi connection with the appliance established through its aerial wireless network
TCHxxxxxxxx and then connect to your home network.
EN
https://tesy.com.
29
Publicidad
