Blue 43BL700 Manual Del Usuario página 20

Menu Operation
Configuring the Picture Menu
• Picture Mode: You can select the type of picture which best corresponds to your
viewing requirements. Contrast, Brightness, Color, Sharpness, Tint (NTSC) and
Backlight can be adjusted when the picture mode is set to User.
– Contrast: Adjust the white level of the picture.
– Brightness: Adjust darkness of black sections in the
picture.
– Color: Adjust the color intensity of the picture.
– Sharpness: Object edges are enhanced for picture
detail.
– Tint: Adjust the hue of the picture. (Valid only for
NTSC signals).
– Backlight: To control the brightness of the screen,
adjust the brightness of panel.
• Color Temperature: Select the color temperature of
the picture.
• Aspect Ratio: You can select the picture size which
best corresponds to your viewing requirements.
• Noise Reduction: Reduces screen noise without compromising video quality.
• Advance Settings: Use the ▲/▼ button to select Expert Settings, and then press
OK button to access the submenu page.
MPEG NR: Reduces MPEG noise to provide improved picture quality.
Dynamic Contrast: Adjusts the contrast to the optimal level according to the image's
brightness.
Film Mode: Sets the TV so that it senses and then processes film signals from all
sources automatically and adjusts the picture for optimum quality.
PC Mode (In HDMI mode): When it is set to "On", the TV set is more suitable to be
used as a monitor (valid only in the VESA mode of the HDMI channel).
OverScan (In DTV mode): The picture reproduction rate is adjusted.
Picture Reset : Reset all picture settings to the factory defaults.
19
Picture
Setting /
Picture Mode
Color Temperature
Aspect Ratio
Noise Reduction
Advance Settings
Home
Nature
16 : 9
Low
...