StetSom BRAVO HQ 400.4 Manual De Usuario página 4

Using REMOTE IN (HIGH INPUT)
The amplifier's REMOTE IN feature can be turned on in three different ways, depending
on your vehicle's system.
• CAN PROTOCOL: This system
has timings that can cause PUFF in
the audio system. To minimize this
happening in vehicles with this system,
we recommend installing the REMOTE
IN (green) wire to the ACC signal.
• AUTO TURN ON: Connect the
REMOTE IN (green) wire to any of your
radio's audio outputs. The amplifier will
detect the presence of audio and turn
on automatically.
• MANUAL OPERATION: Use a
switch or button between the REMOTE
IN connection (green wire) and the
positive 12V battery supply for manual
operation of the amplifier.
If your radio has a remote (REM) output, connect it directly to the REM IN (green
wire) of the HIGH INPUT output for automatic amplifier activation.
ACC SIGNAL
REM IN (green wire)
HIGH OUTPUT
(Radio / Player)
STETSOM
Switch or Button
4
REM IN
(green wire)
Wire Harness
HIGH INPUT
Wire Harness
HIGH INPUT
REM IN
(green wire)
Wire Harness
HIGH INPUT