Coccolle Noori Manual De Instrucciones página 9

EN
Carton box content
2 pcs left and right superior leg tubes; 2 pcs left and right inferior leg
tubes with stand; seat; trays.
Installation and usage instructions
1. Open the seat from its folded position.
2. Making sure that the leg fold button is outwards insert the left and right
superior leg tubes into the seat.
3. Insert the lower part of the legs into the superior leg tubes. Please pay
attention and make the difference between front and rear legs: the front legs are
the ones WITHOUT the hook.
4. Do the above step for the rear legs too. The rear legs are equipped with the
hook used to store the tray.
5. Ensure that so far, the highchair has been properly installed. Make sure that
all joints are well fixed and on the right spot.
6. Adjust the tray: press both tray buttons at the same time and then insert along
the handle. Lock in the chosen position. The tray has two positions, use the
button underneath to adjust.
7. Backrest adjustment: the highchair's backrest can be adjusted into 3
positions. Press both adjustment buttons at the same time and bring the
backrest into desired position.
8. While the baby is in the highchair, always use the restraining system. Insert
each of the 4 belts into the central buckle. To unfasten, press the central buckle.
9. Height adjustment: the highchair has 6 height adjustment positions. Press the
adjustment buttons at the same time and move along the length of the leg tubes
to get to the desired position. You can choose any height position from the 6
available.
10. Highchair folding: first fold the seat from the buttons on the seat side. The
seat must be in the same position as it has been while originally packed in the
box. Then, press the leg fold buttons and after the highchair has been folded,
put the front tray on the rear legs' hook.
Cleaning and maintenance
1. Do not keep the product in direct sunshine for extended periods of time.
2. The cushion cannot be machine-washed, dry cleaned or ironed.
3. To clean the cushion, use a gentle detergent and soft cloth; for stubborn
stains, you can use a natural fiber brush. The plastic and metal spare parts can
be cleaned with a damp cloth. The use of volatile solvents in the cleaning
process it's forbidden.
4. Please verify the state of the product before every use and make sure it
functions properly. Check for any damages at the restrainging system as well.
Loose screws or connection parts should be fastened at all times. In case of
broken or missing spare parts stop using the product. Replace worn or damaged
parts only with spare parts supplied by the manufacturer.
5. Please use the product only as described in this manual, re-read the
instructions as many times as necessary and operate the folding and unfolding
with care.
9