Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
(continued)
Insert
Hose
Insert
the hose locking
end of the "Pos-I-
Lock ®'` hose into the inlet of the Vac.
The hose should
snap into place.
To remove
the hose from the Vac, press
the release
button
in the hose assembly
and pull the hose out of the Vac inlet,
as shown.
Release
Press
Button
and
Pull
Accessory
Storage
Your accessories
may be stored
in the
storage
locations
on the caster
feet.
The hose
may be stored
by wrapping
it
around
the unit as shown.
Power Head
Y
Open
End of
Hose
tAccessory
Storage
Push Button
End of Hose
Operation
_.
WARNING:
To reduce the risk of fire, explosion,
or damage to Vac:
• Do not leave Vac running while unattended
- you may fail to notice important signs indicating
abnormal operation such as loss of suction, debris/liquid
exiting exhaust, or abnormal motor
noises.
Immediately stop using Vac if you notice these signs.
• Do not leave Vac plugged-in when not in use.
• Do not continue running when float has cut off suction.
• Do not operate Vac in areas with flammable gases, vapors or explosive dust in the air.
Sparks inside the motor can ignite airborne flammables.
Flammable
gases and vapors
include:
lighter fluid, solvent-type cleaners, oil-based paints, gasoline,
alcohol, or aerosol sprays.
Flammable
dusts include:
coal, magnesium, aluminum, grain, or
gun powder.
• Do not vacuum up explosive dusts, flammable
liquids, or hot ashes.
• Do not use Vac as a sprayer.
_.
WARNING:
To reduce the risk of electric shock or injury:
• Do not expose to rain or allow liquid to enter motor compartment.
Store indoors.
• Do not handle plug, switch, or Vac with wet hands.
• Do not service Vac while it is plugged-in.
If your Vac is not working as it should, has missing
parts, has been dropped, damaged, left outdoors, or dropped into water, return it to an
independent
service center or call customer service.
• When using an extension cord, use only outdoor-rated
cords that are in good condition.
Do not allow the connection to come into contact with liquid.
• Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.
Publicidad
