Maintenance
Note:
• For optimal performance and to prevent odors, always clean and dry DWT, filters, brush roller,
brush roller cover completely after each use.
• Please make sure each part is installed correctly or the appliance may not work properly.
• Do not soak the appliance or wash it under water.
• Some water may remain in the appliance due to factory inspection.
• After maintenance, place the appliance on the charging dock vertically. Do not expose the
appliance to direct sunlight, and store it indoors in a dry place.
Main Body
To reduce the risk of injury, switch off before
performing maintenance.
Dirty Water Tank
①
• When dirty water reaches the Max line, the appliance will stop working and show a reminder on
the display and play a voice prompt.
• Pull up the tank lid to empty the DWT. Throw the debris on the waste separator into the trash.
Use the cleaning tool to remove remaining debris. Rinse the inside of the DWT and place back
into the appliance. separate hair and debris from dirty water.
②
③
Clean the dirt sensor with a damp cloth or the
cleaning tool.
④
53
⑤