AmazonBasics B087D5FH2R Manual De Instrucciones página 7

6.4 DAB radio mode
3
/ Mode
Scan Menu/Info
1 2
NOTICE
If there is no DAB reception
at any time, change the position of the
product or adjust the antenna�
Press Mode to select DAB mode�
When the radio is switched on for the first time,
it will automatically do a full scan of DAB/DAB+
stations� The list of stations is then stored,
eliminating the need for another full scan when
the radio is turned on next time�
When the scan is complete, the stations are
stored in alphabetical order� The first available
station will be played back�
6.4.1. Changing DAB/DAB+ stations
1� Press the Prev or Next buttons in DAB
mode to navigate available DAB/DAB+
stations�
2� Press Select to confirm�
6.4.2. Auto scan in DAB mode
NOTICE
New stations and services
are added to the stored DAB/DAB+
stations� In order to make new DAB/DAB+
stations and services available on your
radio, run a full scan at regular intervals�
» Press and hold the Menu button in DAB
mode and then the Prev or Next buttons
until <Full scan> appears on the display�
Press Select to confirm�
» The product scans all available DAB/
DAB+ stations and plays the first
available station� Alternatively, you
can activate the auto scan function by
pressing Scan�
Alarm Preset
Vol
3 Prev Next
Select
6.4.3. Displaying station information
1� Select a DAB station�
2� During DAB/DAB+ radio playback, press
Menu repeatedly to display the following
information (if available):
– Ensemble
– Frequency
– Signal frequency error
– Audio state and bit rate
– Time
– Date
– Radio text
– Signal strength
– Programme type
– Power status (mains or battery)
6.4.4. Manually storing DAB stations
You can store up to 20 preset DAB/DAB+
stations�
NOTICE
If there is already an existing
DAB station stored under a preset, it will
be overwritten when you store the new
station�
1� Select the desired station�
2� Press and hold Preset for one second and
then confirm by pushing Select so that
<Preset 1 stored> appears on the display�
3� Repeat steps 1 to 2 to store more DAB/
DAB+ stations�
4� Alternatively you can fast-preset your
favourite top 3 stations by pressing
and holding the 1-2-3 button for
approximately 2 seconds until "Preset
X stored" is displayed, where "X X " is the
number of the preset (1–20)�
6.4.5. Selecting preset DAB stations
1� Press Mode to select DAB/DAB+ mode�
2� Press Preset to access the Preset menu
<Preset Recall> <#: stored station
name>.
3� Use the Prev or Next buttons to select a
preset number and confirm your selection
by pressing Select�
EN
7