Intellinet Network Solutions 562003 Instrucciones página 3

Instructions
• All ports on the switch support Auto-MDI/MDI-X functionality, so
you can use straight or crossover UTP/STP cables to connect the
RJ45 ports to PCs, routers, hubs, other switches, etc.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn't
indicate a link or activity, check the corresponding device for proper setup and operation.
• Use the included power cable to connect the receptacle
on the back of the switch to a power outlet.
• Ports 1 – 8 can provide power to a connected powered device (PoE++ output
up to 90 watts on ports 7 and 8; PoE+ output up to 30 watts on ports 1
through 6); all powered devices should comply with IEEE 802.3bt/at/af.
LED Color
PWR Green
10/100M:
Link/Act/
Orange
Speed
1-8 1000M:
Green
Green
PoE 1-8
Orange
9S-10S
Green
(SFP)
* NOTE: Press the Mode button to alternate between Link or PoE Status.
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address field.
The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Status
On
Off
On
Flashing
Off
On The connected powered device (PD) is receiving power.
Off
On
Flashing
Off
Operation
Unit is receiving power.
Check connection.
Valid port connection.
Data is transmitted/received
No link established.
No PD device is linked.
Valid port connection.
Data is transmitted/received
No link established.
English 3