ALURIN Flow ALU-AIO-I512-000-27 Manual Del Usuario página 9

Problem
Cannot output data from
the computer to the printer
Error printing
Problem
No sound
Problem
Can not work
FAULT ANALYSIS
1. No picture no a. The fuse and circuit breaker are abnormal.
sound b. The power socket switch is not turned on.
c. Poor contact of power line
d. Check the signal source.
2. Image is normal
a. Maybe the volume is not turned on
but no sound
b. May be muted, mute off.
c. The sound setting may be incorrect.
3. No color
a. Adjustable chromaticity
b. Is it a black and white TV show?
4. Sound is normal
a. Adjust brightness and contrast.
but no image b. The TV station may have a bad signal.
5. Image has messy
a. Black spots, horizontal streaks, or images appear due to signal
ripples problems.
b. Interference from other electronic devices.
Solution
1. Make sure the printer power is power on.
2. Make sure the printer is connected
properly.
For assistance, please refer to the manual of
printer.
Solution
1. Adjust the sound controller.
2. Check the volume setting software.
3. Check if the headset is connected
properly.
4. Check the system device manager
to make sure that the sound function
is activated and not interfered by other
hardware.
Solution
1. Make sure the RJ45 connector is
connected to a network hub or switch.
2. Check the hardware status in the BIOS
setup program and enable the LAN Waken
function