Black and Decker BEGAS5800 Traducido De Las Instrucciones Originales página 11

Continuous satisfactory operation depends upon proper tool/
appliance care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Regularly clean the ventilation slots in your tool/appliance
u
and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Voltage
V
Frequency
Hz
Power input W
No-load speed (blade) /min
No-load speed (motor) /min
Max cutting diameter mm
Weight
Kg
Level of sound pressure according to EN 50434:
Emission sound pressure level (L
Measured sound power level (L
EC declaration of conformity
MACHINERY DIRECTIVE
BEGAS5800– Shredder
BEGAS5800
2400, or 2800 (P40)
) 80 dB(A), uncertainty (K) 2.5 dB(A)
pA
) 93 dB(A), uncertainty (K) 1.7 dB(A)
WA
(Original instructions)
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60335-1:2012 + A11:2014 + A13:2017+A1:20
19+A14:2019+A2:2019+A15:2021; EN 50434:2014
2000/14/EC, Shredder, Annex V
Measured sound power level (L
Guaranteed sound power (L
These products also comply with Directive
2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Supply of Machinery (Safety)
Black & Decker declares that these products described under
230
"technical data" are in compliance with:
50
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN 60335-1:2012 + A11:2014 + A13:2017+A1:2019+A14:201
46
9+A2:2019+A15:2021; EN 50434:2014.
2850
The Noise Emission in the Environment by Equipment for use
45
Outdoors Regulations 2001, S.I. 2001/1701 (as amended).
29.6
L (measured sound power level) 93 dB(A), uncertainty (K) =
WA
L (guaranteed sound power) 95 dB(A).
WA
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
ENGLISH
) 93 dB(A)
wA
Uncertainty (K) 1.7 dB(A)
) 95 dB(A)
wA
Patrick Diepenbach
General Manager, Benelux
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
Regulations 2008
BEGAS5800– Shredder
2008/1597 (as amended),
Schedule 8.
1.7 dB (A),
2012/3032 (as amended).
Black & Decker,
08/11/2023
11