Intellinet Network Solutions 562041 Instrucciones página 3

Instructions
indicate a link or activity, check the corresponding device for proper setup and operation.
• Ports 1 – 48 can provide power to a connected powered device (PoE+ output up
to 30 watts on ports); all powered devices should comply with IEEE 802.3at/af.
LED Color
PWR Green
SYS
Orange
1–48
Green
Link
1–48
Orange
PoE
49–54
Green
(SFP)
Rear Panel
Chassis Ground Column
Located on the side of the power supply connector, a grounding
terminal connector is used to provide proper grounding for your switch.
It should be wired to an object that provides earth ground.
Power
Use the included power cable to connect the receptacle on the back of
the switch to a power outlet. Then, turn the On/Off switch to On.
WARNING: Avoid turning on the power switch before connecting the power
cable, as it may cause a power surge that could damage the Switch.
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address field.
The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Status
On
Off
Flashing
Off
On
Flashing
Off
On
Off
On
Flashing
Off
Operation
The Switch is connected to a power source
The Switch is not connected to a power source
System is running.
System is abnormal or no power
Port is connected
Data is transmitted/received
No link established.
The connected device (PD) is receiving power.
The port is not powered or no PD is found
Valid port connection.
Data transmitted/received.
No link established.
English 3