3. If you want to remove the carbon filters from the hoods, you must
rotate them counterclockwise (Fig.6).
4. Install the aluminium cassette filters again after fixing/removing
the carbon filters (Fig.5).
It is compatible with following extractor hoods models:
UCPYRAMID60-19 and OHO6233M.
3. MAINTENANCE
Filter change depends on the frequency of use of the Hood. As a
general rule, if you use the Hood frequently, you should change the
filter after 3 - 6 months.
Dowload this manual in our web site:
www.universalblue.es
6