Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Energy Saving Feature
Selecting the Source
Editing the Input Source Names
This function adjusts the brightness of the TV so as to reduce power consumption. When you
watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the
or
button to select "Setup", then press the ENTER/OK button.
2. Press the
or
button to select "Energy Saving", then press the ENTER/OK button.
3. Select the required option (Off, Low, Medium, High) by pressing the
ENTER/OK button.
4. Press the EXIT button to exit.
You can select among external sources connected to your TV's input jacks.
1.
Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Input".
2.
Press the ENTER/OK button again, to select "Source List".
When no external device is connected to your set, only "TV", "Ext.1", "Ext.2", "DTV" are
activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI" are activated
only when they are connected to your set.
3.
Select the required device by pressing the
Press the ENTER/OK button.
Press the SOURCE button on the remote control to toggle between all the available source.
TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the
P /
buttons on the remote control. But it cannot be selected using the SOURCE button.
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Input".
2. Press the
or
button to select "Edit Name", then press the ENTER/OK button.
3. Press the
or
button to select the device that you wish to edit.
Press the ENTER/OK button.
4. Press the
or
button to select the required device.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
English-18
or
or
button.
button. Press the
Publicidad
