Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE POWER BANK
1. Connect the device via the MicroUSB input to a 5V 1A power
supply.
2. Charging devices: Use the USB-MicroUSB cable for charging
devices. Connect the USB part to the unit and the MicroUSB part to
the device to load. The device will start charging automatically.
3. Charge/discharge: During charging of the internal battery, the
indicator will be red. Once fully charged it turns green. Once loaded
remove it from the charging source. When discharging, the indicator
will be blue
FEATURES
1. Compatible with most USB 5V devices.
2. Control circuit high accuracy (charge and discharge protection,
short-circuit -protection, etc).
3. Advanced Power
Management IC
to
control
and
regulate
temperature, voltage and current.
4. Suitable for most mobile phones, tablets, digital cameras, portable
video games, GPS , MP3 and other devices with 5V input .
5. Compact size, ideal travel accessory.
6. Using the product greater than 500 cycles. This device is a battery
(battery) and as such has a limited life. Use indicates the number of
times the device fully operational amperage. Once these loads, the
device will still work but offering lower benefits, until fully permanent
shock.
PRECAUTIONS
- Charge the battery before first use.
- The unit reaches full capacity after 5-7 cycles of charge / discharge
- Avoid bumps and never remove the device.
Publicidad
