Descargar Imprimir esta página

Cembre CBL08HD Manual Del Usuario página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
EN
(translation of the original instructions)
WARNING:
Always respect applicable legislation for working with electrical equipment in order to reduce
the risk of accidents.
Avoid looking directly into the beam of light, as this will result in dazzling.
Do not use the lamp near a naked flame.
The light source of this luminaire is not replaceable; when the light source reaches its end of
life the whole luminaire shall be replaced.
Luminaire is only suitable for direct mounting on non-combustible surfaces.
WARNING - RISK OF FIRE:
Minimum distance from lighted objects 0.1m
USB POWER OUTLET:
Built-in USB power outlet to charge mobile devices.
Output: 5V, 1A
USE:
To turn the lamp on or off, press the A button.
To increase the brightness, press the B button.
To decrease the brightness, press the C button.
When the brightness level is changed, the new
value is saved, and the lamp will start at that level the next time it is turned on.
BATTERY COMPLIANCE:
The work light is designed to be used with CEMBRE, Metabo CAS batteries.
It will accept the following battery voltages; 12V and 18V.
It is possible to use a CEMBRE power supply instead of a battery.
Discarded electrical products must not be disposed of together with household waste. Please
use recycling facilities. Ask your local authority or retailer for advice on recycling.
3
0.1
m
A
B
C

Publicidad

loading