Publicidad
Idiomas disponibles
Idiomas disponibles
•
Never immerse the di user in water.
•
Unplug the adapter when refilling, cleaning, or moving the di user.
Keep the di user out of reach of children.
•
•
Do not place objects in the water reservoir during operation.
•
Do not place your fingers in the water during operation; this may result
in injury.
Do not place acidic or alkaline chemicals in the reservoir.
•
•
Use only the power adapter provided in the packaging or by
Young Living.
•
Do not shake the di user.
•
Any damage caused by the user does not qualify for replacement by
Young Living.
•
Do not use metal objects to clean the ultrasonic plate; use only a
cotton swab or cloth dipped in rubbing alcohol, vinegar, or Thieves®
•
Household Cleaner.
Never use the product for purposes other than those listed in this manual.
•
•
If the unit will not be used for an extended period or needs to be
relocated, unplug the power adapter, empty the water reservoir, and wipe
the unit clean before storage.
•
Clean the unit before switching to di erent essential oils.
Use only authentic essential oils. Artificial, synthetic, or impure oils and
•
fragrances can damage the di user.
•
The water reservoir level should not exceed the water fill line.
•
When unplugging the power adapter, pull from the adapter plug instead
of pulling the wire.
•
Avoid placing the di user in direct sunlight, close to a refrigerator or fan,
or in a hot environment.
8
Cleaning and maintenance
• Always turn o and unplug the di user prior to cleaning.
• To ensure proper performance, clean the ultrasonic plate and lid
after each use.
• If essential oil begins to build up on the ultrasonic plate, gently wipe it o
using a cotton swab dipped in rubbing alcohol, vinegar, or Thieves
Household Cleaner.
• If essential oil begins to build up on the lid, gently wipe it o using mild
soap and water only. Never use a corrosive detergent to clean the
ultrasonic plate or damage will occur.
• Periodically check under the di user to keep the fan intake free of debris.
Debris can be removed by blowing on the fan intake opening or wiping
with a clean, dry cloth. Do not use aerosol sprays, solvents, or abrasives
to clean the plastic housing.
• When the di user is not in use, clean it and let it dry before storing.
Troubleshooting
When switched on, if the di user does not operate, please try
the following:
• Check that the adapter is securely plugged into the wall socket and the
bottom of the di user.
•
Check that water is in the reservoir and not above the water fill line.
If there is too much water, unplug the unit and adjust the water to the
water fill line and restart. The light should come on, and the di user
should mist.
Notice: When emptying
the water reservoir, pour
the water from the
opposite side of the
reservoir ventilation hole.
®
9
Publicidad
