Descargar Imprimir esta página

My Arcade GAMESTATION PRO Guia Del Usuario página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
5. Insert the USB-A end of the cable into a powered source.
6. Press the power button located on the top of the console.
NOTE: The RGB lights around the power and home buttons will
illuminate when the console is powered on. This may take up to 3
seconds after the power button is pressed.
How to set up the joysticks
1. Remove the battery cover located on the bottom of each joystick.
2. Insert 4 AA batteries in each joystick and replace the battery cover.
3. Move the on/o switch on each joystick from ( ) to ( ).
4. The LED sync indicator on the back of the joystick will flash when
turned on. Once the joystick syncs with the console, the LED sync
indicator will become solid.
NOTE: If you do not want to use batteries, gently insert one end of a
USB-C® cable (not included) into the power port (5V IN) located on the
back of each joystick. Gently insert the other end of the cable into the
front of the console. When using this option, you do not need to
add batteries.
How to insert and remove batteries
IMPORTANT: Use high quality alkaline batteries for longer
playing times.
MENU / RGB button
• A quick press of the MENU / RGB button brings up the
GAME CONTROLS or SAVE MENU options (while in-game).
• A press and hold of the MENU / RGB button allows you to change the
RGB lights on the console and joysticks.
Game controls
Quick press the MENU / RGB button located on the back of the joystick
to access GAME CONTROLS.
3

Publicidad

loading