VEVOR PP13-1 Manual Del Usuario página 9

4. Place the tape in the guide slot of the
tensioner ,swing the retracting handle up
and down to tighten the tape to the
desired tension level.Push the tool pliers
for ward to bend the tape to one side of
the buckle,and then cut the stainless
steel tape with the operation cutting
handle.
5.Use a hammer to screw the end of the
tape between the two ears of the
buckle,and then screw the ears of the
buckle over the steel tape to keep the
tape in the tight position.
MAINTENANCE
1. Avoid prolonged exposure to the sun to avoid aging.
- 7 -