RHINO Z300 Serie Manual De Instrucciones página 8

4. Lista de parámetros del sistema técnico
Parameter Function
Thread track
S01
Stitch number be-
S02
tween two sensors
Delay stitch number to
S03
cut thread after front
sensors
Delay stitch number
S04
to cut thread after two
sensors
Delay stitch number
S05
for starting front air
suction
Front suction close
S06
stitches number.
Back suction start
S07
stitches no.
The delay of back
S08
suction close
Front thread loose
S09
delay
Front thread loose
S10
stitches
Back thread loose
S11
start
Machine stop delay
S12
stitches number.
Suction start stitches
S13
no.
Suction close stitches
S14
no.
The needle no. Of the
S15
delay of back cutting
line
Front sensor respond
S16
time
Default Adjustment
Value Range
3 1~4
20 1~50
4 0~50
06 0~50
0
2 1~50
14 1~50
2 1~50
200 100~5000MS
0
12
0
2 1~99
50 1~250
20 1~100
25 1~100
40 1~100MS
7
Description
Determines the stitch number be-
tween two sensor activations.
Sets the delay in stitch number to
activate the auto thread cutting after
the front sensors are passed.
Establishes the stitch count delay for
automatic thread cutting after pass-
ing two sensors.
Sets the delay stitch number for ini-
tiating front air suction after the fi rst
sensor is triggered.
Specifi es the number of stitches to
begin closing the front suction.
Determines the stitch count to start
back suction after passing the latter
photo-eye sensor.
Sets the delay time for closing back
suction after passing the latter pho-
to-eyes.
Adjusts the delay for loosening the
front thread.
Sets the number of stitches before
loosening the front thread.
Determines the start point for loos-
ening the back thread.
Specifi es the number of stitches be-
fore the machine stops automatically
after trimming.
Determines the number of stitches
for starting suction.
Specifi es the number of stitches for
closing suction.
Adjusts the needle number delay for
back cutting line.
Sets the response time for the front
sensor.