Installation - Geemarc loopHEAR Guia Del Usuario

INSTALLATION

Opening of the catch mechanism
Remove the battery door. Insert the supplied rechargeable battery, plug
the connector into the socket and replace the battery door.
Fig B
7
INSTALLATION
Replace the base plate by placing the hook found on the bottom left of the
TM
loopHEAR into the catch on the base plate. Press the loopHEAR
down gently until you hear a click.:
Hook
Catch
Plug the power cable into the power socket found on the rear of the unit.
Plug the adaptor into the mains supply and switch the supply on.
Strain Relief
TM
8 6