Costway BC10192 Instrucciones De Montaje página 7

Figure2
the button
under frame
Rear wheels support unfolding
2. Rear wheels support unfolding: press and hold the button under frame,
turn the rear wheel support until it is completely unfolded and locked.
3. Rear wheel turn around: press and hold the rear wheel folding button to
turn the rear wheel to the position shown in figure 3. Insert the steel brace
into the hole to stabilize the rear wheel support.
Figure 4
Little seat cover
button to open the little seat cover
12
Figure 3
Steel brace
Rear wheel fold button
4. Take out the little seat cover:
press the button at the bottom of the
seat to open the seat cover, then
remove it.
Figure 5
big seat cover
little seat cover
button to open
the big seat cover
5.Seat and canopy installation:
a: Press and hold the backrest adjustment button on both sides of the seat to
unfold the backrest.
b: Fix the seat on the seat base until heard "click" sound to make sure the
seat is well fixed. Put the little seat cover inside the seat, then buckle the big
seat cover. Press and hold the button at the bottom to unbuckle the big seat
cover.
c: Turn and unfold the canopy to the proper position.
Figure 6 Figure 7
Head rest
Pedal
pedal——outside joint and inside joint. Outside joint for child's feet rest on
them without rotating with the wheels, inside joint for child drive self.
7. Unfold the footrest like the figure 7 shown.
a
backrest adjustment button
b
canopy
6. Installation of headrest
and pedal:
Insert the headrest into the
hole on the backrest like
figure 6 shown. Fix the
pedal on the front wheel,
the connection is finished
when you hear the sound
"click". Note that there are
two joints of the
13