Waterpik AquaScape ASD-833 Manual De Instrucciones

AquaScape
Spa Showerhead
Utilisation de la douche
Waterpik
Cabezal de ducha tipo spa
Waterpik
Instruction Manual
Manuel d'instructions
Manual de Instrucciones
INSTALLATION
Easy to follow instructions on how to install your new AquaScape
Showerhead. Follow steps in the order shown, for best results.
TOOLS NEEDED
7/8" open end wrench is recommended.
(Wrap pivot ball with a soft cloth to prevent fittings from scratching.)
PREPARE
1. Remove old showerhead from shower pipe. Be sure to remove
old pipe tape from threads if necessary.
2. Wrap pipe tape (included) 2 to 3 times around the threads on
A
the shower pipe .
Wing nuts
Pipe adapter
Pivot ball
(black washer should be inside)
INSTALLATION
3. Upon opening the package, pipe adapter will be attached
to lock ring. Remove pipe adapter from lock ring by turning
counter clockwise.
4. Attach showerhead to curved shower arm by hand tightening
clockwise. Wrap a soft cloth around pivot ball and tighten with
an open end 7/8" wrench.
5. Screw pipe adapter onto shower pipe and tighten. Wrap a
soft cloth around pipe adapter and tighten with an open end
7/8" wrench.
6. Make sure black washer is inside lock ring. Lift showerhead and
showerarm (assembled in step 3) into position at shower pipe
level, lining up the ribs on the pipe adapter with the grooves in
the end of the showerarm. Slide lock ring onto pipe adapter and
tighten by hand until snug.
7. Test for leaks. Tighten connections as needed.
™
® ™
AquaScape
® AquaScape ™
TO ADJUST ARM SIDE TO SIDE:
1. Loosen lock ring and slide it off pipe adapter
2. Re-position onto the pipe adapter and re-tighten the lock ring
Model: ASD-833
ASD-839
™
Shower pipe
OPERATION
1. Rotate the control ring for different settings.
A
Wrap pipe tape here
Lock ring
ENJOY YOUR NEW SHOWERHEAD!
CARE AND CLEANING:
1. Clean filter screen at least once a year, or whenever you notice
a drop in water pressure.
2. Soaking and cleaning nozzles with household vinegar will help
remove mineral build-up.
3. Do not clean or rinse the showerhead with harsh chemicals,
heavy-duty cleaners, or abrasives; this may damage parts or
finish and will void warranty.
Lock ring
Wing nuts
Lifetime Warranty
Waterpik Technologies warrants to the original purchaser of this
product that it is free from defects in material and workmanship
for as long as the original purchaser owns this product. Waterpik
will at our election, repair or replace any part of the product which
in our opinion is defective, provided that the product has not been
abused, misused, altered or damaged after purchase. (This includes
damage due to use of tools or harsh chemicals). In the event an item
has been discontinued we will replace with what we deem to be
the closest product. Waterpik is not responsible for labor charges,
installation, or other consequential cost. The responsibility of
Waterpik shall not exceed the original purchase price of the product.
This warranty gives you specific legal rights. You may also have
other rights that vary where you reside. Save your receipt as proof of
purchase is required for warranty action.
If product malfunctions or becomes damaged, stop use and return it to
a Waterpik Technologies Service Center for replacement and/or repair.
For all your warranty and service needs, please visit
www.waterpik.com, click on "Personal Healthcare Products" and
"Service Locator" for your nearest Authorized Service Center.
Shipment of product directly to Waterpik offices may delay service.
Waterpik ® is a registered trademark of Water Pik, Inc. OptiFlow
AquaScape are trademarks of Water Pik, Inc.
TM
© 2005 Water Pik, Inc.
Have questions or need assistance?
visit www.waterpik.com
or call for Customer Service at
1-800-525-2774
8:00 a.m. to 4:00 p.m.,
Mountain Standard Time, Monday-Friday
Waterpik Technologies
Personal Healthcare Products
1730 East Prospect Road
Fort Collins, CO 80553-0001
FN20008751-F AA
Printed in China.
Made in China.
and
TM