Publicidad
Idiomas disponibles
Idiomas disponibles
3.- OPERATION INSTRUCTIONS
When connected to the power supply, the fan is under standby mode. You can control the fan with the
control buttons or with the remote control.
3.1. Fan control panel
1. Remote control signal receiving
Indicator lights:
2. Normal mode
5. Timer 0,5h/1h/2h/4h
8. Mist max
Control buttons:
A. Mist
B. Timer
A. Mist Button
Press the "Mist" button to switch the ultrasonic mist on or off. Adjust the mist volume (Max-Medium-
Minimum) by pressing the "Mist" button several times.
When the mist function is selected, the water tank indicator light will be illuminated green.
If the water tank is empty (or short of water), the water indicator light will be illuminated red.
The mist function and fan function can be worked independently or together.
B. Timer Button
Press the "Timer" button when the fan is on. The indicator will show the time remaining until the fan is
due to switch off. You can select the length of time the fan will be in operation from spans ranging from
0.5 to 7.5 hours in 0.5-hour increments. Press the TIMER button repeatedly, and the sum of the values of
the lights is the remaining time until shut down.
1
2
5
6
8
7
A
B
E
3. Sleep mode
6. Speed Low – Medium – High
9. Mist medium
C. Wind Speed
12
3
4
9
10
C
F
D
4. Natural mode
7. Oscillation
10. Mist min
D. Mode
E. On/Off
EN
F. Oscillation
Publicidad
