OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1.Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
(1) Press
"
Clock/Pre-Set
(2) Turn "
" to adjust the hour figures,
(3) Press "
Clock/Pre-Set
(4) Turn "
" to adjust the minute figures, the input time should be within 0--59.
Clock/Pre-Set
(5) Press "
Note:
(1) If the clock is not set, it would not function when powered.
(2) During the process of clock setting, if you press "
will go back to the previous status automatically.
2. Microwave Cooking
Micro wave "
(1) Press the "
(2)
Press " Micro
wave "
power "P100", "P80", "P50", "P30", "P10" will display in order.
Start/+30Sec./Confirm
(3) Press "
(4)
Turn "
" to adjust the cooking time. (The time setting should be 0:05- 95:00.)
(5) Press "
Start/+30Sec./Confirm
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1
min
1---5
min
5---10 min
10---30 min
30---95 min
Microwave Power Chart
Microwave Power
Display
", the hour figure flash;
", the minute figures will flash.
" to finish clock setting. ":" will flash.
" key once, and "P100" display.
for times or turn "
" to confirm.
" to start cooking.
: 5 seconds
: 10 seconds
: 30 seconds
: 1 min ute
: 5 minutes
100%
80%
P100
P80
the input time should be within 0--23 .
" to select the microwave
50%
P50
EN-12
Stop/Clear
", the oven
30%
10%
P30
P10