Conceptronic POLONA04B Guía De Instalación Rápida página 6

LED indicator:
Power-on
Power off
Pairing mode
Standby mode
Incoming call
During the call
Music playback
Charging process
Charging completed
Low battery reminder
Double connection:
1. Pair with the first mobile phone A.
2. Turn off the Bluetooth on mobile phone A, and the product will automatically
enter pairing mode.
3. Search for and connect with the second mobile phone B.
4. Manually reconnect with the first phone A, so that the Bluetooth headset
connects the two phones.
Automatic reconnection:
1. When the headset is turned on, it can automatically connect to the last paired
phone.
2. If the connection between the product and the mobile phone is lost due to
exceeding the normal distance, it will return to the normal communication distance
within about 5 minutes, and the headset will automatically connect to the newly
paired mobile phone.
Line-in input:
When the headset is switched on, it automatically connects in Bluetooth mode.
However, if the headset is plugged in using the Line-in connection, it will prioritize
playing Line-in audio.
Exiting pairing mode:
(After the headset automatically powers off, the switch should be returned to the
OFF position and then pushed to ON to restart the headset)
If there is no connection during boot in pairing mode, the headset will exit the
pairing mode after 5 minutes, enter standby mode, and automatically shut down
after 5 minutes.
Blue light flashes 5 times.
Blue light goes out.
Red and blue lights flash alternately.
Blue light flashes once every 5 seconds.
Blue light flashes once every 2 seconds.
Blue light flashes once every 7 seconds.
Blue light flashes once every 8 seconds.
Red light remains on.
Red light will turn off.
Red light flashes twice every 7 seconds and there is
a "Toot" sound every 60 seconds.