CESVA FP122 Guía Rápida página 3

QUICK GUIDE FP122
Manual available at:
https://www.cesva.com/en/support/product/
INCLUDES
AP602 Amplified equalized noise
generator
CONNECTION, POWER AND TURN ON/OFF
SCREEN INDICATORS
FAN: This indication appears when the fan is on
PROT*: Appears when an internal protection is active: Temperature, overload, etc.
CLIP*: Appears when exceeding the maximum peak voltage or current at the amplifier output
and the AP602 applies the clipping limitation.
*
It may also appear momentarily when switching on the equipment.
CN012 Speakon-Speakon
cable
Place the BP012 on the tripod
Connect the BP012 to AP602 through the CN012 cable
Match the notches on the male connector with those
on the female connector. Rotate the male connector ¼
MALE
clockwise.
FEMALE
Connect it to the mains
Press the key to turn on/off the AP602
BP012 omnidirectional
speaker and TR012 tripod
To disconnect the cable slide back the tab on the
male connector, turn ¼ counter clockwise the
connector and pull out.
EN
FP122
3