PROZIS arooma Manual Del Usuario página 7

EN
PRODUCT OVERVIEW (SEE PAGE 2)
1. Top cover
2. Power/light button
3. Mist button
4. Max. water line
5. Air outlet
6. Ultrasonic disc
7. DC socket
8. Air inlet
9. Cleaning brush
10. Adapter
11. DC plug
12. AC plug
INSTRUCTIONS
1
230 mL max.
4
1. Remove the top cover.
2. Add 230 mL of tap water in the reservoir.
3. Close the top cover.
4. Connect the adapter's DC plug to the appliance and the AC plug to a power outlet.
BUTTON FUNCTIONS
Power/light button
1st press: Warm white light at 100% brightness
2nd press: Warm white light at 20% brightness
3rd press: Intermittent lamp mode
4th press: Light off
12
2 3
Mist button
1st press: Continuous mist
2nd press: Mist at 15-second intervals
3rd press: Mist off
NOTE:
1. With the diffuser switched off, long-press the mist button for 2 seconds to turn on the
continuous mist function and the light at 100% brightness.
2. When the diffuser is on, long-press the mist button for 2 seconds to turn the diffuser off.
3. The buttons are touch-controlled. When touched, an audio signal will be played.
Water shortage protection
When the diffuser is switched on but runs out of water, it will switch off automatically in order
to protect the atomizer from burning or breaking.
Overheating protection
The diffuser will automatically switch off if any abnormal overheating is detected. This can
prevent shell deformation caused by high temperatures.
Troubleshooting
Some issues that may arise can be solved by the user. If the problem persists after having
tried the following solutions, please contact Prozis customer service.
PROBLEM CAUSE
The appliance is not working It is not connected to a
and unresponsive to input. power outlet.
The power cable or adapter
is broken.
Insufficient mist production There is not enough water in
or none at all the reservoir.
There is too much water in
the reservoir.
EN
SOLUTION
Make sure the plugs are in
place and press the power
button.
Please contact Prozis for
more information.
Refill the reservoir with water.
Remove excess water from
the reservoir. If the water
level exceeds the max. line,
the mist production will be
limited.
13