OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1.Clock Setting
When the microwave oven is electrified, the oven will display "0:00". Buzzer will ring once.
" CLOCK/PRE-SET ", and then the hour figures flash;
(1) Press
(2) Turn "
" to adjust the hour figures
CLOCK/PRE-SET ", and the minute figures will flash.
(3) Press "
(4) Turn "
" to adjust the minute figures
CLOCK/PRE-SET " to finish clock setting. ":" will flash.
(5) Press "
Note:
(1) If the clock is not set, it would not function when powered.
(2) During the process of clock setting, if no operation in 1 minute, the oven
will go back to the previous status automatically.
2. Microwave Cooking
Micro wave "
(1) Press the "
Press " Micro
wave "
(2)
power. "P100", "P80", "P50", "P30", "P10" will display in order.
START/+30SEC./CONFIRM " to confirm.
(3) Press "
(4)
Turn "
" to adjust the cooking time. (The time setting should be within 0:05- 95:00.)
START/+30SEC./CONFIRM " to start cooking.
(5) Press "
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1
min
1---5
min
5---10 min
10---30 min
30---95 min
Microwave Power Chart
Microwave Power
Display
" key once, and "P100" displays.
repeatedly
or turn "
: 5 seconds
: 10 seconds
: 30 seconds
: 1 mi
nute
: 5 minutes
100%
80%
P100
P80
GB
. The input time should be within 0--23
. The input time should be within 0--59.
" to select the microwave
30%
50%
P50
P30
12
.
10%
P10