Linea 2000 DOMO DO263A Manual De Instrucciones página 56

Idiomas disponibles

Timer on + Timer off

You can also switch on both functions simultaneously. This determines when you switch on

the apparatus, but also when the apparatus switches off.

Please note: this time is always from the hour when you programme the setting. For example:

it is now 1 pm. You want the apparatus to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h

and TIMER OFF on 5.0 h.

Sleep

When pressing the "sleep" touch, the selected temperature will be elevated with 1 °C after

30 min. After another 30 min the temperature will increase with another 1°C. The airco will

maintain this temperature for 7 hours. After this time, the airco will go back to the original set

temperature and the "sleep" function will end.

NOTE : this function can not be selected with the "fan" or "dry" function.

Shortcut

With this button you can set and switch on a preferential setting.

If you use a certain setting more often, you can set this by pressing the SHORTCUT button

for three seconds. The apparatus then remembers the settings that are switched on at the

moment of pressing. These settings can include: the user setting (MODE), set temperature,

ventilation speed (FAN) and possibly also the SLEEP setting.

The moment you press the SHORTCUT button, the apparatus will work at the previously

determined settings.

CLEANING AND MAINTENANCE

DRAINING

Permanent drain

During the "dry" mode you can use a permanent drainage.

Remove the drain plug and the rubber top.

Attach the drain hose on the drain.

Make sure the water is drained in a save and permanent way.

DO263A