Monster Tulpar T5 V23.4 Manual De Usuario página 7

System Software
Your computer may already come with system software pre-installed.
Where this is not the case, or where you are re-configuring your computer
for a different system, you will find this manual refers to Microsoft Windows 11.
RAID Support
You need to setup RAID before installing your Windows operating
system (see RAID Setup page).
Shut Down
Note that you should always shut your computer down by choosing the
Shut down command in Windows (see below). This will help prevent hard disk or
system problems.
1. Click the Start Menu icon
2. Click the Power item
3. Choose Shut down from the menu
RAID Setup
Your solid state drives (SSDs) can be set up in RAID mode
(for increased performance or protection). Note that setting up your solid state
drives in RAID mode needs to be done prior to installing the Windows OS.
Do not change the mode unless you intend to reinstall your operating system,
and make sure you back up all necessary files and data before doing so.
To configure your RAID (Redundant Array of Independent Disks) system in
Striping (RAID 0) or Mirroring (RAID 1) mode (see Table 1) you will require two
identical solid state drives.
.
.
.
EN
07