Publicidad
Idiomas disponibles
Idiomas disponibles
03- Fit the hole of he rim in the
tongue of the support plate,
slightly leaning the LCD
05-Tighten the both locking
screws of the LCD support.
13
SUPORTE AIRON SÉRIE WALL
02- Fix the monitor support at the back
obliquous
of your LCD using the indicated screws
lead
for this purpose
The oblique rim must be turned to the
superior part of the LCD.
Attention:
your LCD, these screws may not be
compatible. In this case, read the
manufacturer manual of the LCD and
get the appropriated screws.
04- Fix the LCD on the support
plate.
SAFETY
06- The support has 2 orifices
that allow padlocking.
Depending on the brand of
Publicidad
