Livoo SL259 Manual De Instrucciones página 6

Batteries 2 x AAA (not included)
Drawing of the device
1 Maximum humidity rate
2 Minimum humidity rate
3 Maximum temperature rate
4 Minimum temperature rate
5 Average humidity rate
6 Humidity trend
7 Average temperature
Use of the device
Your device is for indoor use only. You can place it on a flat surface thanks to its stand or hang it on the
wall with the hook on the back of the device (Figure 1 points 14 and 15).
Insert the two AAA batteries into the battery compartment, respecting polarity (Figure 1 point 13).
The maximum and minimum temperature and humidity values are displayed as soon as the unit is
switched on. After 24 hours, the previous recordings will be deleted and the thermometer will update
itself.
Button operation :
C and F buttons on the back of the unit allow you to select the unit of temperature measurement. "C" for
degrees Celsius or "F" for degrees Fahrenheit (Figure 1 items 10 and 11).
The third button allows you to reset the data (Figure 1 item 12).
Temperature ranges :
From -10°C to 70°C
Accuracy of + or - 4 °C from 50°C to 70°C
Accuracy of + or - 2 °C from -10°C to 0°C
Accuracy of + or - 1°C from 0°C to 50°C
Humidity ranges
20% to 95% humidity rate
Accuracy of + or - 5% at 25°C and when humidity is between 30% and 50%
Accuracy of + or - 10% at a temperature of 25°C and when the rate is between 20 and 29%, 51% and 95%.
Comfort range display (Figure 1 point 9):
The comfort range is defined according to the ambient humidity.
Too Low
OK
High
Temperature and humidity trend (Figure 1 points 6 and 8):
When the temperature ranges between +/- 1°C a horizontal arrow is shown on the display.
Blue color
Green color
Red color
8 Temperature trend
9 Comfort scale
10+11 Celsius or Fahrenheit display
12 Reset button
13 Battery compartment
14 Foldable stand
15 Wall attachment
‹
40%
Between 40% and 70%
›
à 70%
www.livoo.fr