Descargar Imprimir esta página

npg DVD-210HZU Manual De Instrucciones página 16

Ocultar thumbs Ver también para DVD-210HZU:

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Setup menu settings
4.4 Video setup page
•Quality: Allows you to set the video quality
Sharpness
High – Medium – Low
Brightness
Contrast
-20 to +20
Hue
-16 to +16
Saturation
-9 to +9
-9 to +9
•HD
HD: Enable or disable the HD output
Audio: Select audio coding (AUTO - PCM)
4.5 Preference page
Selecting the colour system that corresponds to your TV when AV utputs.
This DVD Player is compatible with both NTSC and PAL.
PAL Select this if the connected TV is PAL system.It will change the video
signal of a NTSC disc and output in PAL format.
NTSC - Select this if the connected TV is NTSC system.It will change the
video signal of a PAL disc and output in NTSC format.
Auto: Chang the video signal output automatic according to the playing disk
format.
• Audio: Selects a language for audio (if available).
• Subtitle: Selects a language for subtitle (if available).
• Disc Menu: Selects a language for disc menu (if available).
• Parental
Some DVDs may have a parental level assigned to the complete disc or to
certain scenes on the disc.This feature lets you set a playback limitation
level.The rating levels are from 1 to 8 and are country dependent. You can
prohibit the playing of certain discs that are not suitable for your children
or have certain discs played with alternative scenes.
• Password mode: Set password mode on/off. If set to off, change
parental level will not check password.
• Password: select the menu password change page.
OLD PASSWORD: Enter the OLD password, (Factory setting is 1369), and
the cursor will jump automatically to NEW PASSWORD.
NEW PASSWORD: Enter the NEW password. Enter 4 digits from the
remote control unit numeric buttons, and the cursor will automatically
jump to CONFIRM PASSWORD.
CONFIRM PASSWORD: Confirm the NEW password by entering it again. If
the confirmation is incorrect, the cursor will stay in this column. After en-
tering the correct new password again, the cursor will jump automatically
to OK.
OK:When cursor is on this button, press ENTER key to confirm setting.
• Default:Back to the factory setting.
7

Publicidad

loading