Descargar Imprimir esta página

Braun Skin i-Expert PL7147 Manual Del Usuario página 22

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
In case of adverse events please contact your national competent authority and the device manufacturer.
Trouble shooting
The following troubleshooting guide may help you solving initial problems you may experience with this
device.
Problem
Power bars do not light up when treatment window
is placed on the skin.
The device doesn't work on small areas.
Flashing sequence slows down.
On the power bar, only the first LED illuminates
red.
Centre mode button light is flashing.
First LED on power bars flashes red.
The power bars show an unfamiliar pattern of one
red LED shining along with individual white LEDs.
All white LEDs flash.
The device is broken, cracked or appears
defective.
Disposal
The product contains recyclable electronic waste. To protect the environment, do not dispose of
it in the household waste, but take it to appropriate local collection points.
Labels and symbols
The base station is marked with the following symbols:
Type BF Applied Part
Class II equipment
Optical radiation
Follow instructions for use
22
Solution
Make sure the device is connected to an electrical
outlet. Press any button (4 or 5) to activate it.
Ensure both skin tone sensors are in full contact
with the skin. If needed, move the device in a way
that both skin tone sensors get skin contact.
Use the precision head (12) on small, hard-to-
reach areas.
Make sure both skin tone sensors are in contact
with the skin.
Device is in heat-protection mode. To get back to
normal speed, allow device to cool down.
Invalid skin tone reading. Your skin is either too
light or too dark. The device will not flash.
Device is deactivated. Press any button to
re-activate it.
Head (10, 11, 12) has been taken off. Re-attach it.
Device error. Device will not operate.
Unplug and reconnect. If error persists, contact a
Braun Service Centre for repair.
End of product lifetime. Maximum number of
flashes (400,000) has been reached.
Do not use if the handle, the base station or the
mains cord is damaged. If you are in any doubt
about the safety or suspect it is damaged in any
way, you must not use it.
Serial number
WEEE waste disposal mark of the
European Union
Conformity mark of the European Union
Manufacturer:

Publicidad

loading

Este manual también es adecuado para:

6036