Gree YB1FA Manual De Usuario página 4

Wireless Remote Controller YB1FA
No. Name
Signal
1
transmitter
ON/OFF
2
button
MODE
3
button
- button
4
+ button
5
FAN button
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
● Signal transmitter
● Press this button, and the unit will be turned on; press it once more, and the
unit will be turned off. When turning off the unit, the Sleep function will be
canceled, but the presetting time is still remained.
● By pressing this button, Auto, Cool, Dry, Fan, Heat mode can be selected
circularly. Auto mode is default after power on. Under the Auto mode, the
setting temperature will not be displayed; Under the Heat mode, the initial
value is 28°C (82°F);Under other modes, the initial value is 25°C(77°F).
AUTO ; COOL;
● Preset temperature can be decreased by pressing this button. Pressing
and holding this button for more than 2 seconds can make the temperature
changed quickly until release this button and then transmit this order. The
temperature adjustment is unavailable under the Auto mode, but the order
can be sent by pressing this button. Centigrade setting range: 16-30;
Fahrenheit scale setting range 61-86.
● Preset temperature can be increased by pressing this button. Pressing and
holding this button for more than 2 seconds can make the temperature
changed quickly until release the button and then transimit this order.
The temperature adjustment is unavailable under the Auto mode, but the
order can be sent by pressing this button. Centigrade setting range: 16-
30; Fahrenheit scale setting range 61-86.
● By pressing this button, Auto, Low, Middle, High speed can be circularly
selected. After power on, Auto fan speed is default.
AUTO
●
Low speed
Middle speed
High speed
Note: Under the DRY mode, the fan will be kept running at the low speed
and the fan speed isn't adjustable.
Function Description
DRY; FAN; HEAT (only for cooling and heating unit)
2