AstroAI GL-0801A Manual Del Usuario página 4

OPERATION INSTRUCTIONS
1. Press the trigger button to turn
the tire pressure gauge on. The
gauge will display "0.0" on the
LCD screen.
2. Place the nozzle straight on the
tire valve you wish to measure.
Press firmly to ensure a good
s e a l a n d p r e v e nt air f r o m
leaking. Hold the gauge on the
valve until the measurement
display locks. It should only take
a second if you have a good seal.
3. Remove the gauge to easily
read the pressure.
Click the button to switch units
4.
b et we en P SI, bar, kPa and
kg/cm². Press and hold the
button for 3 seconds to turn the
ga u g e o . T h e ga u g e a l s o
automatically turns o shortly
after use.