Fagor 400i Manual De Referencia Rápida

Display 400i
Quick Reference
This Quick Reference manual provides access to the DRO's main functions displayed on its 7" color screen.
Once these functions are accessed, the DRO will guide the operator through its operations easily and intuitively
with interactive assistance messages.
For an in-depth review of all the features, you can find the complete manual on our website:
www.fagorautomation.com. You can also access it directly by scanning the QR code shown in [SETUP] [USER]
[MANUAL].
Turning the DRO on and off
The Display is switched on and off by pressing the on/off switch at the back.
Front plate
7" color
screen
Power indicator
Set axes to zero and Preselect
Pressing Set/Clear toggles between axis zeroing (Clear) and presetting (Set). The status bar shows the current
status of this function at the top left with the words Set o Clear.
Degrees  Degrees minutes seconds
Searching the center of a part
(Manual code: 14460377 version: 2402)
Keys for axes
Keys to open droplist buttons of the
LED FUNCTION BAR
2
On/off switch
Display 
Set / Clear
1
Keys for entering numeric values
Cursor keys
Validate
Abort