WENKO 24689100 Instrucciones Para El Uso página 12

1
On /Off button on the un-
derside of the power unit
The motion sensor must clearly detect a movement to switch on the LED shower rail. The motion sensor
does not work when the battery is switched off.
When the battery is switched on, the illuminated rail is activated once a movement is detected. Automatic
off function after 60 seconds. The motion sensor does not work through glass walls, etc.
Please only use the shower when the power unit is connected to the shower rail.
Information regarding the power unit
The power unit is only suitable for the operation of Wenko LED illuminated rails.
The charge status is displayed by one press on the On/Off switch on the underside:
4 LEDs light up
3 LEDs light up
2 LEDs light up
1 LEDs light up
To charge, please connect the enclosed charging cable with a wall socket using an AC adapter. The power
unit is charged automatically. The integrated overcharge protection terminates charging as soon as the
power unit is fully charged. It will take approx. 7 hours to charge the battery.
The charging current should preferably be 5V / 2 A.
Please only use suitable power supply units.
12
24689100_MA_Multi_A5_291020mr.indd 12 24689100_MA_Multi_A5_291020mr.indd 12
Usage
2
Motion sensor, 90° angle
from the centre, 3m,
60 sec. Automatic off
Charging
76-100 %
51-75 %
26-50 %
1-25 %
12.11.20 09:56 12.11.20 09:56