Descargar Imprimir esta página

Kokido EV18 Manual De Usuario página 5

Limpiafondos inalámbrico recargable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
GETTING STARTED
Charging The Battery
IMPORTANT NOTE: Fully charge the pool vacuum (about 6 hrs) before
using it for the first time.
WARNING!
- KEEP YOUR FINGERS AWAY FROM THE OPENING TO AVOID BEING HIT
BY THE IMPELLER WHEN IT'S ON.
- Use only the original USB charger and charging cable provided.
- Make sure the pool vacuum and the charging port are clean and
dry before set-up and charging. (TIPS: use a cotton bud to dry the
charging port and charging pins)
- The charging pins are waterproof. However, remnants of water in
the port and around the pins could result in natural occurrence of
stains (a byproduct of chemical reaction between water and electric
currents). Otherwise, the stains can be removed by light scrubbing
with a cotton bud soaked with juice of lemon or vinegar.
1. Place the unit on a flat surface. Ensure the pool vacuum is OFF by
turning the On/Off switching knob clockwise. Pry over the protective
plug to expose the charging port. Align and attach the charging
cable to the charging port.
charging cable and ensure both the charging cable and charging
port are clean and dry before charging them. TIPS: Use cotton bud to
dry the charging port and pins. Connect the other end of charging
cable to USB adaptor's port.
WARNING!
Be sure not to invert the
4

Publicidad

loading