Habitat Marc Instrucciones De Montaje página 3

EN
This manual contains important information that should be kept
for future reference.
Materials
Mod. A:
Cover (Copparo): 100% polyester.
Mod. B:
Cover (Velvet): 100% polyester.
Mod. C:
Cover (Melina): 85% polyester, 15% acrylic.
Mod. D:
Cover (Bormio): 100% polyester.
Mod. E:
Cover (Alba): 100% polyester.
Mod. F:
Cover (Bellagio): 51% cotton, 28% viscose, 7% linen, 7% polyester,
6% acrylic, 1% polyamide.
Mod. G:
Cover(Lucca): 59% polyester, 17% cotton, 16% viscose, 8% linen.
Mod. H:
Cover (Venezia): 62% polyester, 17% cotton, 14% viscose, 7% linen.
Mod. I:
Cover (Vintage): aniline leather of cow .
Mod. J:
Cover (Savoy): semi aniline leather of cow.
Seat and backrest structure: steel.
Armrest frame: pine plywood covered with oiled oak veneer
or covered with lacquered walnut veneer.
Padding of the seat and backrest: 100 kg/m
chipboard foam, high resilience polyurethane foam 65 kg/m
polyurethane foam HS 27 kg/m
Padding armrest: polyurethane foam 30 kg/m
Suspension: zig zags springs.
Feet: aluminum with powder coated epoxy finish or polished
aluminum.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Do not swing.
Beware of sharp objects.
Maintenance
Avoid direct and prolonged exposure of the product to sunlight.
The colors may fade.
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
Fabric cover
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry
dabbing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear. Avoid direct and prolonged exposure of the product
to sunlight. The colors may fade.
Leather cover
Do not sit on the leather with damp or wet clothes.
Clean every 2 months with a slightly damp soft cloth. Then wipe
with a dry cloth.
Use a cleaning kit for upholstery leather.
Feeding the leather regularly so that it keeps its flexibility.
Marc - 05/2023
3 polyurethane
3 .
3 .
Wooden part
Dust regularly with a dry cloth.
Sponge up spills immediately with a clean, dry cloth. To avoid
scratches, do not use a recurring sponge or grain detergent. Do
not use abrasive products.
The use of special products for furniture is not recommended or
even necessary. Clean the veneer with a soft, damp cloth. Then
wipe with a dry cloth. Maintain with movements in the direction
of the wood fibers.
If in doubt, contact a professional to carry out cleaning.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this
product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at:
www.habitat-design.com or write to this address: HABITAT,
70 AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.
3 ,
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2