Publicidad
Idiomas disponibles
Idiomas disponibles
Operation steps:
Connect the plug to the wall socket.
►
If needed, adjust the current by pressing the power setting button. This will cycle
►
through different current levels: 16A, 13A, 10A, and 8A. The selected current will
be indicated by a green light.
Connect the car plug to the car.
►
Lock your car.
►
When charging is complete (Blue ON)and you wish to disconnect:
Unplug the charging connector from the car.
Disconnect the plug from the wall socket.
Place the dust cover on the car plug and properly store the charger.
Usage tips:
■
Apply firm pressure when connecting the charger to ensure the pins are properly
inserted into either the socket or the car.
If the wall socket's neutral wire is incorrectly positioned, the charger may not function.
■
■
The car should be unlocked and turned off to initiate charging.
The car plug must be directly connected to a Type 2 socket.
■
Set both the current and timer after the charger is connected to the wall socket and
■
before connecting it to the car.
EN
3
Publicidad
